null

PiXAPRO PIKA200 PRO Portable Battery Powered TTL Pocket Flash With Pro ST-IV Trigger

Was: £389.98
Now: £379.00
Write a Review

 The PIXAPRO PIKA200 PRO (Godox Witstro AD200 PRO) is everything you loved about the PIKA200 Pocket flash, but with added Pro features including a 9-Stop power range (1/1 – 1/256 power) of 1/10 stop power adjustments, as well as increased colour-consistency rated at 5600°K ± 100°K over its entire power range and gives you access to gives you access to powerful flash with a guide number of up to 60m at ISO100, whilst still maintain its small and portable pocket size. Great news for PIKA 200 Lovers the 200Ws compact and portable Off-camera TTL flash still has an array of extra modular interchangeable-Flash-heads and they are backward compatible with the PIKA200. The PIKA200 PRO is powered by a rechargeable battery pack, which will give you approximately 500 full-powered shots per charge. With a built-in receiver and a variety of different modes from TTL, HSS to the multi-burst, it is perfect for people who shoot weddings, portraits, events, fashion, sports, fitness & advertising. It is especially good for shooting on location or in awkward spaces.

The PIXAPRO PRO ST-IV (equivalent to Godox's XPRO) a 2.4GHz TTL Radio flash trigger system capable of transmitting TTL information between your camera and compatible flashes. The PIXAPRO PRO ST-IV trigger has a transmission range of approximately 100m in an open area, and since the transmitter and receivers use radio waves as opposed to Infra-red, you don’t need direct line of sight and is not affected by bright sunlight which can sometimes cause problems with optical flash trigger systems.

The PiXAPRO PRO ST-IV transmitter features a large backlit Dot-Matrix LCD display, with a new and intuitive user-interface. The ST-IV now gives you the option of working with up to 5 groups (A, B, C, D and E) of flashes simultaneously. Each group can now be easily accessed via the five-dedicated group selection buttons, located at the side of the LCD screen. You can also mix TTL and Manual flashes together in one lighting set-up.

One of the PIXAPRO PRO ST-IV’s new features is its TCM function, which enables you to take a shot in TTL mode to attain the correct exposure and then convert the TTL power levels to display on the LCD as Manual power levels, all from the touch of a single button.

The PIXAPRO PRO ST-IV supports TTL, HSS (High-Speed Sync) Rear-Curtain sync and stroboscopic multi-flash. It also a USB Type-C port to enable you to update the ST-IV’s Firmware as new technologies become available.

The perfect solution for busy photographers who require a reliable TTL radio trigger system, with a quick and intuitive interface.

What’s In the Box
  • 1x PIKA200 PRO Body
  • 1x PIXAPRO PRO ST-IV TTL Trigger
  • 1x Speedlite Fresnel Head
  • 1x Bare-Bulb Head
  • 1x Bare-Bulb Flash Tube
  • 1x Rechargeable Li-ion Battery
  • 1x Battery Charger
  • 1x Charger cable
  • 1x Umbrella Bracket
  • 1x Carry Case

 

 

 

Faster Recycle Times

The PIKA200 PRO has faster recycle times compared to the original PIKA200 model. The Recycle times have been reduced down to 1.8 seconds at full power as opposed to 2.5 seconds of the original, meaning you are less likely to miss key moments.

 

 

More Precise Controllability

The PIKA200 PRO features a 200W flash tube with a 9-Stop Power Range, meaning it can be turned down as low as 1/256 of its full power. This is great for times when you only require a small touch of light for your scene.  It can now also be controlled in 1/10 Stop increments for greater precision.

 

 

New and Improved Stand Adapter

The PIKA200 PRO comes with a redesigned metal stand mount adapter. The new stand mount adapter features a smooth stepless tilting mechanism, along with a redesigned top, to ensure the stand mount adapter secures firmly to the PIKA200 PRO.

 

 

New Stable- Colour Mode

The PIKA200 Pro features a stable-colour mode, for greater colour consistency. The PIKA200 Pro is now capable of 5600K+100k. This makes perfect for use on shoots where colour-consistency is critical, such as commercial and advertising photography.  

  

Super Fast Recycling Times

The PIKA 200 PRO has super-fast recycling times which range between 0.01 and 1.8 seconds and has 5 controllable groups and 32 different channels to provide maximum flexibility and control with your flash.

 

 

Compatible with ALL PIKA200 Accessories

The PIKA 200 PRO is cross compatible with all the existing PIKA200 accessories including the same Battery, Heads (such as the Round Head, and the LED Head etc.), as well as all the same modifiers. The Extension head and the twin Brackets adapter are also cross compatible.  

 

 

Fits in your Pocket.

Weighing in at 560g (without battery and Head) and just under 2kg with attachment and battery give or take and measuring 168mm x 75mm x 50mm (Without Flash Head), it can be carried in your pocket and makes it perfect for using in small spaces out of the way, great for interior photography.

 

High-Capacity Rechargeable Battery

The PIKA200 PRO has a 14.4V/2900mAh rechargeable Lithium-ion battery pack giving approximately 500 full-powered shots per charge, perfect to keep you going throughout a shoot without the need for mains power.

 

 

Interchangeable Flash Heads

Interchangeable flash heads, enabling you to switch between a Speedlight-styled Fresnel lens (for a direct-focused beam) and a bare-bulb head (for an Omni-directional beam). This also opens a wide range of possibilities in terms of flash modifiers, meaning that it would be compatible with most modifiers designed for Speedlites as well as modifiers designed for Bare-Bulb flashes. It can also be used with the PiXAPRO Smart Speedlite Bracket for use with Studio flash modifiers.

 

 

Lighting that Rivals Studio Strobes

Despite its small form factor, the PIKA200 PRO has a guide number of 60m at ISO100. Making there no need to compromise on quality or portability.  

 

TTL Compatible

The PIKA200 PRO gives you access to TTL automatic metering which will quickly provide you with perfect exposure without the need for manual metering, which could sometimes cause you to miss key moments and will support Canon, Nikon, Sony, Olympus, Panasonic, and Fujifilm Cameras.

 

 

Capture motion sequences with Multi-Flash Mode

The PIKA200's stroboscopic multi-flash mode, causes your PIKA200 to fire multiple low-powered flashes in rapid succession. When combined with a slow shutter speed, you can capture motion sequences with one exposure, in-camera which can be set up to 90 flashes at a frequency of 99Hz (flashes per second).

 

 

Overpower the sun with High-Speed Sync mode

The PIKA200 Pro‘s high-speed sync (HSS) mode enables your flash to sync at shutter speeds higher than you camera's sync speed up to 1/8000 of a second, which allows you to overpower the sun!

 

 

Motion trail with Rear-curtain sync mode

The PIKA200 Pro supports rear-curtain sync, which when combined with a slow shutter speed enables you to achieve more natural-looking motion-trail effects.

 

 

Capture fast-moving motion.

The PIKA200 Pro used IGBT technology to produce short flash duration's, as quick as 1/13,000 of a second, which enables you to capture fast-moving subjects such as water splashes etc whilst still maintaining colour accuracy throughout its range opening up a whole range of possibilities. 

 

Flash Exposure Bracketing (up to ±3 stops).

Found on all top-of-the-line flashes, flash exposure bracketing allows you to dial in the flash exposure compensation for each of three frames so that you can take three pictures in succession, each with a different amount of flash exposure compensation, and determine which amount of exposure compensation is appropriate going forward. 

 

 

Built-in 2.4GHz Flash Receiver

The CITI 600 features a built-in 2.4GHz flash receiver, which allows it to be used in conjunction with the PIXAPRO 2.4GHz flash Triggers. This allows you to control your flash heads remotely such as flash power settings, modelling lamp on/off, changing groups & channels and Triggering.

 

 

Never miss a key moment with The One System

The One System allows you to communicate with our PIXAPRO flashes built-in receivers and control them all from one trigger. The 2.4GHz system will give you full functionality, compatible with Canon, Nikon, Sony, Fuji, Olympus & Pentax 

 

The PIKA200 is the perfect Pocket size solution for the photographer that requires the power of a studio flash on location whilst being small and portable with plenty of features to boot, including rechargeable batteries, TTL and HSS. This unit is available in a variety of combination kits at great value and is suitable for people who shoot weddings, portraits, events, fashion, sports, fitness & advertising. Thanks to the small size and ease of portability make it especially good for shooting on location.

 

This product is provided with a UK 3-Pin Power cable, if you require an EU power cable please notify us when purchasing your item.

 

Please Note: The PIKA200 Pro is backwards-compatible with all of the original PIKA200 Heads, Modifiers and Accessories.